DESCALING CHEMICALS

SCALEBREAKER RANGE:

QUICK LINKS

NEED HELP?

For advice on the correct product for any application, contact our telephone help line on 01727 875020.

FOAMBREAKER

ANTI-FOAM ADDITIVE FOR USE IN DESCALING OPERATIONS

In cases where heavy limescale deposits lead to excessive foaming, FOAMBREAKER should be added either via the descaling pump tank, or direct into the equipment being descaled. FOAMBREAKER may be added beforehand to prevent the formation of foam if preferred.

Foambreaker anti-foam

  • INSTRUCTIONS
  • PACK SIZES
  • TECHNICAL DATA

Application & usage:

Dosage Rate:

This will vary dependent on the amount of limescale, the acid used and circulation rate, but as a guide, add 25ml (a full measure on the dispensing pack) per 50 litres of descaling solution.

Experience may enable lower dosage rates to be used, particularly in non-descaling applications.

Instructions:

  • Loosen red cap.
  • Squeeze pack to fill small chamber to required level.
  • Remove red cap and pour out FOAMBREAKER.
  • Available in:

  • 1 litre dispenser pack (AFB002)
  • Technical data:

  • Usage rate: ca. 10ml per 50 litres of descaling solution
  • Appearance: creamy liquid
  • Odour: none
  • Density at 20°C: ca. 1.0 g/ml
  • pH of 10% solution: ca. 7
  • Solubility in water at 20°C: infinite
  • Max temp: n/a
  • Comments: disperses in water and acid solution