DESCALING CHEMICALS

SCALEBREAKER RANGE:

QUICK LINKS

NEED HELP?

For advice on the correct product for any application, contact our telephone help line on 01727 875020.

NEUTRALISING LIQUID

FOR NEUTRALISING ACIDIC FLUSHING CHEMICALS BEFORE DISPOSAL

Neutralising Liquid is an alkaline compound for neutralising descaling chemicals before disposal, and flushing out boilers and heat exchangers after descaling.

Neutralising Liquid

  • INSTRUCTIONS
  • PACK SIZES
  • TECHNICAL DATA

Application & usage:

Neutralising acidic descaling chemicals:

Slowly add neutralising liquid to descaling solution until pH or litmus paper show solution as neutral or mildly alkaline. (Red litmus turns blue=pH above 7).

Flushing out boilers / heat exchangers after descaling:

Use at a dosage rate of one litre of neutralising liquid per 100 litres water. The resultant solution should be circulated through the descaled equipment for a few minutes.

REFER TO THE APPROPRIATE MATERIAL SAFETY DATA SHEET BEFORE USE.

CAUTION: This liquid is an alkali, and gloves and goggles should be worn when handling. Splashes of solution into the eye should be irrigated with large quantities of clean fresh water.

Available in:

  • Cartons of 12x1 litres (ANL002)
  • Cartons of 4x5 litres (ANL004)
  • Technical data:

  • Appearance: clear liquid
  • Density at 20°C: ca. 1.25 g/ml
  • pH of 10% solution: <11.5
  • Solubility in water at 20°C: miscible in all proportions