THE ULTIMATE POWER FLUSHING & DESCALING PUMP
- High performance flushing pump for professionals.
- 80% more performance in a compact, highly portable format.
- Unrivalled flushing ability; the CF90 Quantum cleans systems more effectively, in less time.
• Pressure balanced high flow rate for maximum cleansing without risk of system damage.
• Cleans systems up to 40 rads, to a standard exceeding BS7593.
• Suitable for hot or cold flushing.
• 3-storey capability.
• High flow rate and instantaneous flow reverser for increased flushing efficiency.
• Portable - large diameter ‘stair’ wheels - for use anywhere in house.
• 40 litre tank.
• Run dry capability; 70+°C operation.
• Hoses and fittings ready assembled.
• Secondary water inlet.
• Acid proof - will descale combi boilers, water heaters and more.
The CLEARFLOW CF90 QUANTUM is a purpose built tool for power flushing heating and cooling systems to cure the circulation and noise problems which often occur with time, or as a result of design or installation faults. These problems are generally caused by accumulations of sludge, corrosion deposits, and scale which need to be removed.
The CLEARFLOW CF90 QUANTUM pump is temporarily connected into a system, so that the high water velocity, combined with an instantaneous flow reversing device, dislodges and mobilises sludge and corrosion deposits, even those which resist traditional cleaning methods.
Having loosened and mobilised the debris, the CLEARFLOW pump forcibly expels it from the system through full bore dump valves, and out to waste, using a high velocity flow of fresh water.
Radiators and other heat emitters may be individually flushed without removal or disconnection from the system. After the power flush, the system is full of clean water, and re-instatement to normal operation takes only a few minutes.
The CF90 QUANTUM is built with acid resistant materials, and can handle all normal commercially available descaling and power flushing chemicals. It is suitable for power flushing commercial and industrial systems, and for descaling boilers and water heaters. It may also be used to circulate chlorine solutions for system sterilisation purposes.
THE USE OF FLUSHING CHEMICALS WITH A CLEARFLOW CF90 QUANTUM
There is a direct relationship between the flow rate of water and its ability to move particles both horizontally and vertically, and the high velocity water flow of the CLEARFLOW CF90 produces dramatic results on problem heating systems.
However, the smaller the particle size, the more easily water will lift it and propel it along, and specially formulated power flushing chemicals such as Power Flush FX2 or HYPER-FLUSH quickly break down corrosion debris and sludge into small particles to further improve flushing efficiency.
They penetrate, loosen, and dissolve, even heavy deposit build ups, which are then forcibly expelled from the system by the high water velocity of the CF90.
When using a high performance pump such as the Quantum, you’ll want to pair it with equally high performance chemicals, such as POWER FLUSH FX2 & HYPER FLUSH, and to give the system lasting protection with performance tested SYSTEMSAFE-DM corrosion and scale inhibitor.
CLICK ABOVE FOR MORE CF90 IMAGES
The
unit may be used with any commercially available chemicals
currently in use for flushing and descaling heating systems,
including strong acids or alkalis. Pumps with 220 volt motors
are single phase, and may be used on a standard domestic
13 amp supply.
A
5 ampere fuse should be fitted in the plug top. We recommend
the use of a residual current circuit breaker plug or adapter
for extra protection.
Technical
Data:
